Ultimarc I-PAC Ultimate I/O Player 1-2 Wire Harness for Goldleaf Buttons (.187in/4.8mm Joystick, .110in/2.8mm Buttons)

Bundle of 33 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting joysticks and 0.110" (2.8mm) spade connectors for connecting our Goldleaf buttons, or others with .110" connectors, to the Ultimarc Ultimate I/O Controller. Plugs directly into Ultimate I/O board. Includes a black daisy-chain wire with 0.187" (4.8mm) spade connectors for the ground connections on joysticks and another black daisy chain with 0.110" (2.8mm) spade connectors for ground connections on the buttons.

Connector Specifics:

• 8 - 0.187" (4.8mm) for 2 Joysticks (4 switches each)
• 4 - 0.187" (4.8mm) for Player 1/2 Coin, Player 1/2 Start Buttons **
• 4 - 0.110" (2.8mm) for Player 1/2 A & B Buttons
• 16 - 0.110" (2.8mm) for Player buttons 1-8 for both players

** Even though these wires have 0.187" connectors, they can still fit on the 0.110" connections of a Goldleaf button. They will be wider than needed, but will still connect. If they are loose you could squeeze them with pliers but that will likely not be needed.

The primary harness in this kit is also known as the "U-HID Harness Type 3", Ultimarc part #L3B.