Wire & Electrical Products

Arcade Renovations
If there's anything else you think we should carry, please contact us and let us know.

Female-Insulated-Spade-Crimps-187-50-Pack
.187" Female Spade Crimps - 50 Pack
Use .187" crimps for the micro switch on arcade buttons
Price $4.95
Male-Insulated-Spade-Crimps-187-50-Pack
.187" Male Spade Crimps - 50 Pack
Use these .187" male crimps with our pre-made female crimp wires to make microswitch extension cables.
Price $4.95
Female-Insulated-Spade-Crimps-250-50-Pack
.250" Female Spade Crimps - 50 Pack
Use .250" crimps for the LED holder on LED buttons.
Price $4.95
1-Player-Arcade-Wire-Kit
1 Player Wiring Kit (.187in/4.8mm)
1 player arcade wiring kit for I-PAC
Price $7.95
12v-3a-power-supply
12v 3a Power Supply
12 volt 3 amp ac/dc adapter power supply for LED buttons or Audio Amplifier
Price $5.99
12v-6a-power-supply
12v 6a Power Supply
12 volt 6 amp ac/dc adapter power supply for LED strips. 6 amps will power up to 16-1/2ft of 5050 RGB 60/meter LED strips.
Price $17.00
12v-8a-power-supply
12v 8a Power Supply
Average rating:
average rating 100%
12 volt 8 amp ac/dc adapter power supply for LED strips. 8 amps will power up to 22ft of 5050 RGB 60/meter LED strips.
Price $19.00
12v-molex-to-male-barrel-plug-adapter
12v Molex to Male Barrel Plug Adapter
Power LED strips, LED arcade buttons, or LED marquee lights from a computer power supply with this Molex to Male Barrel plug adapter.
Price $3.95
2-Player-Arcade-Wire-Kit
2 Player Wiring Kit (.187in/4.8mm)
Average rating:
average rating 100%
2 player arcade wiring kit for I-PAC
Price $13.95
1m-power-supply-extension
3.25ft (1M) Power Supply Extension
A 3.25ft (1 meter) power supply extension cable. Ideal for mounting the RGB controller in a different location than the power supply.
Price $1.99
30-connection-187in-daisy-chain-ground-wire
30 Connection .187" Daisy Chain Ground Wire
30 .187" female quick disconnects daisy-chained together to easily connect the ground wires on your buttons and joysticks.
Price $4.50
36v-3a-power-supply
36v 3a Power Supply
Average rating:
average rating 100%
36 volt 3 amp ac/dc adapter power supply for AimTrak Recoil Light Guns
Price $20.00
rgb-controller-44-button
44 Button RGB Controller (AR)
RGB Controller for 5050 RGB Strips. 44 buttons to control colors and fade features.
Price $4.99
5v-2a-power-supply
5v 2a Power Supply
5 volt 2 amp ac/dc adapter power supply for our CGA to HDMI Video Converter Board or 5v LED buttons.
Price $5.99
6ft-usb-type-a-extension-cable
6ft USB Type A Extension Cable
A 6ft USB extension cable for use with all our I-PAC boards and USB adapters. Need to mount it farther from your computer, this is what you need!
Price $3.99
Arcade-Marquee-LED-Light-Strip
Arcade Marquee LED Light Strip
Average rating:
average rating 100%
This 20" White LED strip with cloudy cover makes a clear even light for lighting up your arcade marquee. Excellent for marquee boxes or cabinets.
Price $6.95
Arcade-Marquee-LED-Light-Strip-Kit
Arcade Marquee LED Light Strip Kit
Average rating:
average rating 100%
This kit includes a 20" White LED strip, power supply, power supply extension cord, and a barrel plug adapter to easily light up your arcade marquee.
Reg. Price $15.88 $13.95 On Sale!
wire-female-187-connector-blue
Blue Wire with .187" Insulated Female Connector
1 meter (39") long wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.
Price $0.50
dual-usb-cabinet-mount
Cabinet Mount Dual USB 3.0 Port
Average rating:
average rating 97%
Easily add 2 external USB ports to your MAME cabinet. Perfect for adding hand-held controllers to your machine.
Price $11.95
arcade-cga-ega-vga-rgb-to-hdmi-video-converter-board
CGA/EGA/VGA/RGB to HDMI Video Converter Board
Easily use an LCD monitor or TV with your arcade game by converting the PCB video format to standard HDMI. Converts CGA, EGA, VGA, or RGB to HDMI using the standard Arcade 5-pin RGB connector, VGA connector, or bare wires.
Price $39.99
arcade-cga-ega-yuv-rgb-to-vga-video-converter-board
CGA/EGA/YUV/RGB to VGA Video Converter Board
Easily use an LCD monitor with your arcade game by converting the PCB video format to standard VGA. Converts CGA, EGA, YUV, or RGB to VGA using the standard Arcade 5-pin RGB connector, VGA connector, RCA connectors, or bare wires.
Price $29.99
wire-female-187-connector-green
Green Wire with .187" Insulated Female Connector
1 meter (39") long wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.
Price $0.50
jamma-plus-wire-harness-top
Jamma Plus+ Wire Harness
Jamma Plus+ Harness with English labels for multi-game PCBs. Supports 6 player buttons.
Starting Price $13.95 * Quantity Discounts Available *
jamma-plus-wire-harness-10-pack
Jamma Plus+ Wire Harness - 10 Pack
10 Pack of Jamma Plus+ Harness with English labels for multi-game PCBs. Supports 6 player buttons.
Reg. Price $139.50 $119.50 On Sale!
led-arcade-buttons-power-wire-kit
LED Arcade Buttons Power & Wire Kit (.250in/6.3mm)
Average rating:
average rating 100%
Power supply and wire kit to power the LEDs on 30 LED arcade buttons with .250in/6.3mm connectors.
Reg. Price $15.89 $13.95 On Sale!
led-wire-kit
LED Button Wiring Harness (.250in/6.3mm)
Average rating:
average rating 100%
Wire Kit to connect power to up to 30 LED pushbuttons with .250in/6.3mm connectors.
Price $8.95
wire-female-187-connector-orange
Orange Wire with .187" Insulated Female Connector
1 meter (39") long wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.
Price $0.50
wire-female-187-connector-purple
Purple Wire with .187" Insulated Female Connector
1 meter (39") long wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.
Price $0.50
wire-female-187-connector-red
Red Wire with .187" Insulated Female Connector
1 meter (39") long wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.
Price $0.50
rollie-leaf-switch
Rollie Leaf Switch
Average rating:
average rating 100%
Turn regular microswitch pushbuttons into leaf switch buttons by replacing the microswitch with this leaf switch!
Starting Price $2.95 * Quantity Discounts Available *
screw-on-cable-ties-20-pack
Screw On Cable Clamps - 20 Pack
20 screw in cable/wire clamps, fits 6 22 gauge wires.
Price $3.00
stick-on-cable-ties-20-pack
Stick On Cable Clamps - 20 Pack
20 stick on cable/wire clamps, fits 4 22 gauge wires.
Price $3.00
stick-on-pcb-feet-12-pack
Stick On PCB Feet - 12 Pack
Average rating:
average rating 100%
12 Stick-On PCB feet for mounting PCBs to metal or plastic.
Price $3.00
stick-on-pcb-feet-4-pack
Stick On PCB Feet - 4 Pack
4 Stick-On PCB feet for mounting PCBs to metal or plastic.
Price $1.50
happ-110-watt-power-supply
Suzo Happ 110W Power Supply
Average rating:
average rating 100%
Suzo Happ 110W Power Pro Power Supply (Part # 80-0064-00)
Price $34.75
happ-130-watt-power-supply
Suzo Happ 130W Power Supply
Suzo Happ 130W Power Pro Power Supply (Part # 80-0210-00)
Price $42.95
happ-power-cord
Suzo Happ 8ft Power Supply Cord
Suzo Happ 8ft Power Supply Cord (Part # 80-1200-00)
Price $4.95
ultimarc-ultimate-io-player-3-4-harness
Ultimarc I-PAC Ultimate I/O Player 3-4 Wire Harness (.187in/4.8mm)
Two harnesses with 8 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting buttons and joysticks to the Ultimarc Ultimate I/O Controller. Plugs directly into the Player 3-4 connectors on the Ultimate I/O board. Include a black daisy-chain wire with 32 0.187" (4.8mm) spade connectors for the ground connections.
Price $19.00
ultimarc-ultimate-io-9-led-single-connection-pack
Ultimarc PacLED64/Ultimate IO 10-Wire Harness (.250in/6.3mm)
Average rating:
average rating 100%
Bundle of 10 wires, 22" long, with 0.250" (6.3mm) spade connectors for connecting LED buttons to the PacLED64 or Ultimate IO LED Controller.
Price $13.95
ultimarc-ultrastik-button-encoder-harness
Ultimarc UltraStik 360 Button/Encoder Harness
Average rating:
average rating 100%
9 wire harness to connect buttons to an UltraStik joystick or can be used for as output of the joystick data if desired.
Price $8.50
wire-female-187-connector-yellow
Yellow Wire with .187" Insulated Female Connector
1 meter (39") long wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.
Price $0.50
zippy-switch-vm-p1l-00d0-z
Zippy 50g .187" Microswitch
Average rating:
average rating 100%
Reg. Price $0.85 $0.75 On Sale! * Quantity Discounts Available *
2ft-dupont-4-pin-male-to-female-extension
2ft Dupont 4 Pin Male to Female Extension
Use to extend wires on RGB LED buttons, Ultimarc SpinTrak Spinners, or U-Trak Trackballs.
Starting Price $2.99 * Quantity Discounts Available *
2ft-dupont-4-pin-female-to-female-jumper
2ft Dupont 4 Pin Female to Female Cable
Connect our U-Trak RGB LED Panel to a PacLED64 or I-PAC Ultimate with this 4 pin jumper cable.
Starting Price $2.99 * Quantity Discounts Available *
2-way-power-supply-splitter
2 Way Power Supply Splitter
Use to split the power from 1 power supply to 2 RGB controllers or AimTrak Recoil Light Guns
Price $1.99
ultimarc-ultimate-io-player-1-2-harness-187-110
Ultimarc I-PAC Ultimate I/O Player 1-2 Wire Harness for Goldleaf Buttons (.187in/4.8mm Joystick, .110in/2.8mm Buttons)
Bundle of 33 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting joysticks and 0.110" (2.8mm) spade connectors for connecting our Goldleaf buttons, or others with .110" connectors, to the Ultimarc Ultimate I/O Controller. Plugs directly into Ultimate I/O board. Include a black daisy-chain wire with 0.187" (4.8mm) spade connectors for the ground connections on joysticks and 0.110" (2.8mm) spade connectors for ground connections on the buttons.
Price $15.00