Hidden Hardware Trackball Mounting Kit - 2-1/2" Screws For U-Trak Trackballs

Replacement mounting kit for an Ultimarc U-Trak trackball. U-Trak trackballs are designed to be installed from under your control panel due to their high lip so you can use this kit if you lose any of the bolts/inserts that come with the trackball. This kit uses 10-24 thread bolts and inserts like our other hidden hardware kits. These inserts are larger than the stock U-Trak inserts and will need a 7mm wide hole to install them.

Note: This will *not* work on Suzo-Happ trackballs, they are not designed to be installed from under the control panel. (They have a very low lip so the ball will not stick above the control panel if you mount it from underneath.)

TIP: Drill a 7mm hole then install the inserts using 5mm hex driver/allen wrench.

Kit Contains:

• 4 10-24 Threaded Inserts
• 4 10-24 2-1/2" Screws
• 4 #10 Lock Washers

Threaded Insert Install Options:

• 5mm Allen/Hex L-Wrench
• 5mm Allen/Hex Insert Bit (Fits standard 1/4" bit holder)
• 5mm Allen/Hex Power Bit (Fits standard 1/4" quick change bit holder)