Ultimarc AimTrak Arcade Light Gun With Recoil - Black

*International Orders* - We are only shipping these to United States and Canada at this time.

Black Ultimarc Aimtrak USB Arcade Light Gun with RECOIL and line-of-sight aiming.

• 36v 3a power supply required for recoil feature sold separately
• Black gun with sensor bar and instruction booklet
• Emulates a USB mouse and game controller, with no drivers required.
• Compatible with MS Windows, and Playstation 2
• Works with all monitors including CRT, LCD, Plasma
• Accurate aim (after calibration) for games which do not have on-screen cross-hairs.
• Up to 4 guns can be used together

Important Information:

• This is *not* Plug-and-Play, some setup and calibration is required. See the first link in the "Docs & Tips" section below for the instructions.
• Additional work is needed to get a light gun working on Raspberry Pi or other Linux versions. See all the "Linux/Pi" links in the "Docs & Tips" section below before ordering.

Recoil Feature:

• The recoil feature needs a 36 volt power supply from 2-3 amps or 24v from 3-4 amps.
• Do NOT use more amps than listed, as that will overload the recoil solenoid
• We have a 36v 3a power supply available here
• Per Ultimarc, a power splitter is not recommended, each gun should have their own power supply. We no longer suggest a splitter as it can kill recoil solenoids. Dead recoils powered from a splitter will not be covered under warranty.
• You can use 12v or 24v and 1a or 2a but the recoil power will be less

Box Contains:

• Complete gun with 2 buttons
• 4 meter USB/Power combo cable
• IR bar for mounting on top of monitor
• Instruction booklet

Docs & Tips:

• Detailed setup guide including MAME configuration and game list
• Download AimTrakConfiguration Utility Installer for Windows (via Ultimarc.com)
• YouTube video by Maverick's Arcade showing general setup and MAME config
• YouTube video by Maverick's Arcade showing config of multiple guns
• Linux/Pi: Katie Snow's python scripts for AimTrak and IPACs on Linux/Pi
• Linux/Pi: Configuration Utility (via gunpadawan)
• Linux/Pi: Another video of setup with RetroPie (via eldon226)
• RetroPie tips for Spinners, Trackballs, Lightguns, and other Mouse Devices
• AtGames Legends Ultimate: Aimtrak Lightgun Running Perfectly on ALU 1.1 CoinOpsX 5.5 (via RaphSeraph on Reddit)
• AtGames Legends Ultimate: Connect AimTrak Light Guns via USB is here! Firmware 4.11.0 (via PDubs Arcade Loft)
• AtGames Legends Ultimate: AimTrak Light Gun Tips & Tricks (via PDubs Arcade Loft)
• AtGames Legends Ultimate: AimTrak Setup Guide by Wagner's Tech Talk (Updated March 2023)